Upgrading OS10 devices using Autoloader

Root Galaxy Pocket Neo GT-S5310

Want to root your samsung galaxy neo gt-s5310??

Then follow the procedure given below to get your neo successfully rooted.

Note:Do this on your own risk,rooting voids the warranty of your device.

Image Source: Samsung.com

Before You Start:

1. Install USB Drivers for Samsung Galaxy Pocket NEO on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy Pocket Neo by selecting Settings >> About Phone.

Necessary Downloads:

1. CWM Recovery

2. Odin

3. Update Package for Rooting

4. Samsung Drivers\kies

Procedure To Root Your Device:

1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.

2. Run ODIN 3.0.7. Don't change any setting (checkboxes) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38" or Turn to Yellow) - if not check if your USB port is functional and Samsung drivers installed correctly.

3. Click on PDA button and chose CWM recovery (downloaded). Don't rename or decompress the file.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.

4. Copy update package for rooting on SD card and put the card in device's slot.

5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root Superuser.zip file and press power button again.

That's it you have successfully rooted your galaxy pocket neo.For any suggestions,help and questions leave a comment below.

Official Thread: XDA

Hold Power Sortly Just Vibrate Immediatly Click Vol Down Long 2 sec Show Android Logo
Hold Vol-Up Option Show
1-reboot system now
2-apply update from adb
3-wipe data/factory reset
etc

ALL MTK USB Driver 2013

New Update V0.8

( Win xp+Win 7+Win 8+Vista-32/64 )

Download

Password - zakirrgsm

MTK Lafone Download

Password - zakirrgsm

Upgrading OS10 devices using Autoloader

[ Edited ]

- last edited by

If you need to upgrade your operating system (OS) and your BB10 device won't upgrade otherwise; or if your over-the-air upgrade failed, try this process.

This is also a good process IF you want a complete wipe and new OS installed to start with a like-factory fresh device.

(there is also a good illustrated step by step located here.)

If you are not experiencing device issues, and need to upgrade with a less-invasive OS install (you don't need a device wipe and don't want to overwrite your settings and data), use this method described here:

These directions apply to Z30, Z10, Q10 and Q5 models.

Check your Model Number at Settings > About > Model Number, and make sure you download the corresponding file below!

10.2.1 files

(OS 10.2.1.537 and 10.2.1.2102 have been officially released by BlackBerry and most carriers have begun to roll it out to users.)

Software version 10.2.1.3175
For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.3175 file here
For Z10 model STL100-1: Download Download 10.2.1.3175 file here
For Z10 models STL100-2, -3, -4: Download 10.2.1.3175 file here
For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.3175 file here
For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.3175 file here

Software version 10.2.1.2273
For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2273 file here
For Z10 model STL100-1: Download Download 10.2.1.2273 file here.
For Z10 models STL100-2, -3: Download 10.2.1.2273 file here.
For Z10 models STL100-4: Download 10.2.1.2273 file here.
For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2273 file here.
For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2273 file here.

Software version 10.2.1.2102 (same as OS version 10.2.1.2141)
For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2102 file here
For Z10 model STL100-1: Download Download 10.2.1.2102 file here
For Z10 models STL100-2, -3, -4: Download 10.2.1.2102 file here
For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2102 file here
For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2102 file here

Software version 10.2.1.537 (same as OS version 10.2.1.1925)
For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.1925 file here
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925 file here
For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.1925 file here
For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.1925 file here

10.2.0 files

(OS 10.2.0.1803 has been officially released by BlackBerry and the carriers have begun to roll it out to users.)

For Z30 models STA100-1, -2, -3, -4, (all): Download the 10.2.0.1803 OS files here.
For Z10 model STL100-1: Download the 10.2.0.1803 OS files here.
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS files here.
For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download the 10.2.0.1803 OS files here.
For Q5 models SQR100-1, -2, -3 (all): Download the 10.2.0.1803 OS files here.

10.1 files

(OS 10.1.0.4537 and 10.1.0.4633 have been officially released by BlackBerry and the carriers around the world are beginning to roll it out to users.)

For Z10 models 100-1, -2, -3, -4: Download the 10.1.0.4537 OS file here
For Z10 models 100-1: Download the 10.1.0.4633 OS file here
For Z10 models 100-2, -3, -4: Download the 10.1.0.4633 OS file here
For Z10 models 100-2, -3, -4: Download the 10.1.0.4687 OS file here

For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4633 OS file here
For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4687 OS file here

For Q5 models, download the 10.1.0.4633 OS file here

(you can use these directions with any OS version, I've only posted these releases linked above)

Remember, this process will totally wipe your device, so the backup is important.

Download the file above to a Windows PC. Extract it from the ZIP file if it is zipped. If it is a ".rar" file, you will need a WinRar unpacking app on your PC to extract the file.
Connect your BlackBerry to the PC. Using Link, do a backup* (see below) of your phone.
Locate the downloaded file and run the autoloader (double click on the EXE file) and a black DOS window appears indicating "Connecting to bootrom". The DOS window processes the install, and begins to load the OS. If you have a security passwored, you will be asked to enter it.
When the OS loading is complete, your Z10 will reboot. Disconnect from the PC, and the device will startup.
Optional but recommended: Wipe your device at your Settings > Security > Security Wipe. This can take 30 mins to an hour.
Go through the required device setup of connecting to WiFi, Agreements, enter your BlackBerryID, and Get Acquainted screens.
Reconnect to the PC and perform your restore using BlackBerry Link.
Now, you will need to re-enter account passwords for email, Twitter, Facebook, etc.

Backup Notes: When you backup using Link, you can make one total backup, or divide that backup into three different databases (Setup | Media | App Data). I always break that backup into the three different databases so that I can restore each separately because I have had some issues with a full restore failing in the App database restore, so then I can safely restore only Settings and Media.

Remember, this process does totally wipe your device, so the backup is important. Reserve about two hours time for the process... performing the backup and restore takes the longest part of the time and will vary according to the amount of data and apps on your BlackBerry.

Post Upgrade device lag, heat, fast battery discharge: After any OS upgrade on a BB10 device, it will take 48-72 hours for the device data syncing of email, contacts, social apps, etc., to complete and finish. High data transfer after an upgrade cause high processor use, which in turn causes high battery usage, which in turn can cause higher than nornal heat from the device. Likewise, high processor use will cause some lag and initial slowness. Ignore and and be patient. It can take the 48 hours for all contacts to sync back to the device. Connect to a good WiFi source and relax. The battery will recover after a few days and you'll see normal battery usage again. Just don't drain your battery to 10% or less each time, top off the charge. You'll notice a difference after a couple days.

That said, it's relatively easy to do and your device will love it

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8

1000% network done

SPD-SC6531 Micromax X098 Download

Password - zakirrgsm

MTK Micromax X210 Download

Password - zakirrgsm

Micromax x267 SPD-SC6531 Download

Password - zakirrgsm

Micromax X222 Flash File Download

Password - zakirrgsm

Huawei G6008 SPD-6600L Download

1280 China MT6223 Flash File Download

Rockchip CPU Solution For Hang Problem/Pattern Problem/Password Without Adb

1] Connect your device first in bootmode
[ there's a lot of bootmode on rockchip much better try all the buttons vol Down and power button / connect power on tablet to usb cable and press the rest hold/button / press menu button are connect usb cable / open tab and check on pcb have buttons pressed it and connect usb cable ]
2] Connect tab to p.c
3] RUN Software
4] Do following steps

Download

This should work on both galaxy star. S5282 and S5280

Download CWM recovery
Download Odin
Download Super SU

Firstly, boot into odin mode by turn off your phone and wait 10 seconds. This is to ensure your phone has completely switched off.
Hold down power+volume down+home key. A screen will come asking you to continue. Press voume up key to continue.

Open odin as administrator and then click pda and choose recovery file downloaded from attachment. You will have to unzip the odin and recovery. Sometimes Odin wouldnot show files on desktop so make sure recovery is in DRIVE:/ANY NAME/ RECOVERY.TAR

Flash it by clicking start.

The phone will restart.

Switch off phone again. This time boot into recovery by pressing this combination. Hold down power+volume up+home key You may leave power key after you see model number.

Choose flash zip via recovery and choose SuperSU.zip

Restart phone after flashing the zip

YOU ARE ROOTED WITH CUSTOM RECOVERY. ENJOY

Odin307.zip - [Click for QR Code] (347.1 KB, 10610 views)

recovery.tar.zip - [Click for QR Code] (5.58 MB, 27401 views)

UPDATE-SuperSU-v1.04.zip - [Click for QR Code] (878.7 KB, 19596 views)

Searching for a phone. Please wait...
Found phone on COM12
Firmware write started.
Writing BOOT\BCMBOOT section...
Writing BOOT\BOOT2 section...
Writing BOOT\PATCH_DSP section...
Writing BOOT\SYSPARM_DEP section...
Writing BOOT\SYSPARM_IND section...
Phone will restart now. Please don't disconnect cable!
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Phone will restart now
Firmware writing successfully completed.

--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM91
Selected model: E617G
Reading info...OK
Mode: Normal
Model ID: LGE617G
Firmware compiled date: Apr 19 2012
Firmware compiled time: 06:00:00
Firmware released date: Sep 19 2012
Firmware released time: 12:22:33
SW Version: LGE617GAT-00-V10c-SSV-XXX-SEP-19-2012+0
IMEI: 352797-05-213499-1
Bluetooth address: 00:AA:70:4E:CF:90
Wi-Fi MAC address: 00:AA:70:D2:C7:56
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM91
Selected model: E617G
Reading info...OK
Mode: Normal
Model ID: LGE617G
Firmware compiled date: Apr 19 2012
Firmware compiled time: 06:00:00
Firmware released date: Sep 19 2012
Firmware released time: 12:22:33
SW Version: LGE617GAT-00-V10c-SSV-XXX-SEP-19-2012+0
IMEI: 352797-05-213499-1
Bluetooth address: 00:AA:70:4E:CF:90
Wi-Fi MAC address: 00:AA:70:D2:C7:56
Switching to Download mode...OK
Unlocking...
To avoid damaging your phone, please, follow these simple precautions:
Use a clean PC (without any installed drivers and software for BlackBerry phones, modem Dashboard software, Phone PC suites software).
Please, make sure the phone's battery is fully charged.
You should not run any other programs or attach new devices to your computer during this operation!
Sending loader...
Searching security area...OK
Reading security area...OK
Backup saved to "E617G_15-02-2014_13-39-12.SEC"
Analyzing security...OK
IMEI: 352797-05-213499-1
Writing security area...OK
Switching to Normal mode...
Found model LGE617G at port COM91
Finalizing...OK
Rebooting phone...OK
Phone successfully unlocked!
Rebooting phone...

Octoplus/Octopus Box LG Software v1.4.6 Release Notes

Added support for the following models:
- P659H - added world's first Direct Unlock, Repair IMEI, Repair Security, Repair Wi-Fi MAC Address,
- P659H - Repair BT Address, Write Firmware, Write Security Backup, Read/Write/Repair NVM.
- E960 - added Unlock Bootloader, Lock Bootloader, Unroot Device, improved Unlock and Repair IMEI
- E960 - operations (from now, firmwares with Android 4.2.1, 4.2.2, 4.3.0 are also supported, it is not
- E960 - necessary to downgrade firmware version to 4.2.0).
- P655H - added Unroot Device, improved Root Device operation.
- P655K - added Unroot Device, improved Root Device operation.
- P659 - added Unroot Device, improved Root Device operation.
- P659BK - added Unroot Device, improved Root Device operation.
- P659BKGO - added Unroot Device, improved Root Device operation.
- MS659 - added Unroot Device, improved Root Device operation.
- D520 - added Unroot Device, improved Root Device operation.
- D520BK - added Unroot Device, improved Root Device operation.
Improved Repair/Write NVM operations for E98x series.
More info and discussion are HERE
___________________________

Octoplus Box JTAG Software v1.4.9 Release Notes

Added support for the following models:
- HTC Evo Design 4G (PH44100) - added Dead Boot Repair, Repair IMEI, Repair CID,
- HTC Evo Design 4G (PH44100) - Read Codes, Read/Write Flash - all via USB (thanks to Mr. Dr_Wolodya).
- Samsung GT-S6812i - added Dead Boot/Device Repair.
- Samsung GT-S5310L - added Dead Boot Repair.
- LG P659H - added Dead Boot/Device Repair.
All pinouts and Repair procedures are described in Software manuals ("Help" button in the Software).
More info and discussion are HERE
___________________________
WBR,
Octoplus Box Team

Nokia Sl3 HashReader

Download

Download

Password - zakirgsm

Download

Update Service

Update your phone for optimum performance and get the latest enhancements. Regardless of whether you have the latest software, it’s a good routine to run the Update Service to improve software stability. Also, if you experience problems with your phone this may be solved by a software update.

Before you perform a software update, make sure you back up and save any important data stored in your phone. Data stored on the Memory card will not be affected by an update.

System requirements

Internet connection (preferably broadband)
USB cable
Intel® Pentium® 4, 2.0 GHz or higher, AMD Athlon
500 MB free hard disk space
512 MB RAM
1 available USB 2.0 port
Windows XP™ (Home or Professional) with SP2 or later
Microsoft® Windows Vista™
Microsoft® Windows 7
Microsoft® Windows 8

Installation instructions

Download the installation package to a temporary folder on your PC.
Run the downloaded file, and follow the instructions that appear
Download

iphone 3G , 3GS Cydia Dowload

Download

Jailbreak Tool Shell 2k14 Download

...:::: Z A K I R G S M :::...

Download requirement files:

- Jelly Bean 4.1.2 For LG VuF100L

- Jelly Bean 4.1.2 For LG VuF100S

- LG_ROOT_PACK.rar

- Fix Sms for LG Vu F100L.rar (Please read instruction in zip file to fix sms 160)

- Kh LG F100L 4.1.2.zip

- LGUnitedMobileDriver_3.7.zip

- AIO-P990-ToolKit_v5.5.exe

Extract all zip files. zakir gsm

How to install:

1. Install: LGUnitedMobileDriver_3.7.exe file to your PC

2. Install: AIO-P990-ToolKit_v5.5.exe file in your PC

- Download: hosts

- Copy and overwrite hosts file to: C:\Windows\System32\Drivers\etc

(It is important you have to do and please connect your PC to the internet before you start Step 3)

3. Run: AIO-ToolKit from desktop in your PC then you will see this:

4. Select an option by typing its number or letter: 6 and then letter: C

5. Put your device to Download Mode by: Hold vol up + and plug your device to PC

(see picture)

6. Change some option like picture below:

- Select Type: 3GQCT

- Phone Mode: Emergency

- Select KDZ file that you downloaded (it is .kdz file)

7. Click on: Normal web upgrade test and then you will see picture below:

- Click on: Upgrade Start

8. You will see picture below:

- Country: Different Country

- Language: English

- Click on: OK

9. This picture will appear:

Don't disconnect your device you have to wait until your device auto reboot.

Note: If progress stuck in 4% or 5% please don't worry it is working so you just wait until your device auto reboot.

How to install Khmer Unicode on LG VuF100:

1. In your device go to: setting--> security and then Tick Unknow sources

2. Go to: setting--> developer options and then Tick USB Debugging

3. Go to: setting--> PC connection--> USB connection type--> select MTP

4. Go to: LG_ROOT_PACK folder and then Run: LG_Root_Pack.exe file

(Follow by instruction...)

5. After your device rebooted go to: setting--> PC connections--> USB Connection type--> Select

Mass Storage

6. Copy: Kh LG F100L 4.1.2.zip to your device

7. Launch 2nd-init Recovery from Apps in your phone and install 2nd init CWM Recovery

then Reboot Recovery ( your device will reboot to Recovery mode)

8. Select install zip from sdcard--> Choose Zip from sdcard--> Kh LG F100L 4.1.2.zip-->

Select: Yes- install Kh LG F100L 4.1.2.zip

9. Then ++++Go Back++++ and Reboot system now

10. After your device already rebooted go to App Store and install Phum Keyboard for LG

11. To enable Phum Keyboard to write khmer go to: setting--> Language & Input--> Tick Phum

Keyboard and set it as default keyboard

Now you try to write sms in khmer or open web sites in browser on your phone and write khmer.

Enjoy!

Pages

cricket

Sunday, August 3, 2014

Monday, July 28, 2014

Tuesday, July 15, 2014

Friday, July 11, 2014

Wednesday, July 9, 2014

Upgrading OS10 devices using Autoloader

Monday, July 7, 2014

Tuesday, June 24, 2014

Saturday, June 21, 2014

Tuesday, June 10, 2014

Friday, May 30, 2014

Saturday, April 26, 2014

Rockchip CPU Solution For Hang Problem/Pattern Problem/Password Without Adb

Tuesday, April 15, 2014

Thursday, March 27, 2014

Saturday, March 15, 2014

Thursday, March 6, 2014

Tuesday, March 4, 2014

Monday, March 3, 2014

Saturday, February 15, 2014

Friday, February 14, 2014

Saturday, February 8, 2014

Thursday, January 23, 2014

Saturday, January 18, 2014

Update Service

System requirements

Installation instructions

Friday, January 17, 2014

Thursday, January 9, 2014

Wednesday, January 1, 2014

Label 2

Label 3

Language

Page Views ..::ZAKIR GSM::..

Visitors

Blogger templates

Facebook

Followers

..::ZAKIR GSM::..

Clock..::ZAKIR GSM::..

Popular Posts

Blog Archive

About Me

My Old Video

Archive

Popular Posts

Ads 468x60px

Featured Posts

Social Icons

Daftar Blog Saya

Laman