MT65xxb GT-i9190 imei repair Done 10000% By VOLCANO

COM port searching and preloader handshake.

  Connect successfully.

  CPU TYPE:MT6572, E01

  DSP Firmware Version:2000.00.00

  DSP Patch Version:1.0

  Software Version:MOLY.WR8.W1315.MD.WG.MP.V1

  Hardware Version:SANSTAR72_WET_JB3_HSPA_HW

  Audio Version:Unknown

  IMEI1:invalid.      

  IMEI2:invalid.      

>>IMEI success.

Uni-Android Tool Beta

                                 Download   Uni-Android Tool Beta Test ZAKIR GSM

Samsung s3 i9300 & Note2 N7100 & i9500 s4 Dead boot repair solution & imei null solution only for i9300

Procedure:
* Download samsung s3 boot card maker Here

* Extract it on desktop

* Take a card reader insert memory card into the card reader nd connect it to the pc

* From the extracted folder run Diskdump2.exe

* Select generic storage Device. pictures below follw it


* Now to write the scripts folle the below given picr



Now done yu are succesfully created Dead boot memorycard

To continue further 

Requerments:

* Z3X samsung Box or SPT Box (i used z3x)

* special UART Cable (300k or 500k uartcable)

* Download teraterm-4.78 From Here

* Fully charged battery

Dead boot Reapairing procedure

* Download nd extract teraterm-4.78 on desktop

* From extracted folder run ttermpro.exe there select serial port nd change the serial port to z3x serial
port lik below givin in the picr



*After Select The Serial Port Press Ok Button den Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button lik below givn in the picr





* Now insert the created boot card to the mobile

* Connect the Uart cable via z3x box

* Now Insert the battery nd wait for 5min if the procces didnt start discnnt the mobile close ttermpro agin try it.

* if it run success yu vil the result below given lik this.

Quote:

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,

* if yu get this error at the end [Patch Stop] This is not Rom Code. yu cant fix yur mobile yu have to change yur emmc chip

Quote:

TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.

* After done this yur mobile must me n download mode or white screen if white screen manually put into download mode.

* After dead boot repair mine white screen i manually put into download mode pir below


* Now update your mobile with factory firmware with PIT file lik below given n the picr.Factory firmwareDownload Here



* After update complete yur mobile may not have imei .imei null or yur mobile will not boot bcoz of dead boot repair. yur efs must be corrupted

* To Fix this prob first root yur mobile Download from here (flash it through odin select as odin) 

* Now Download this EfS repair file nd flash it through odin select as odin yur mobile must boot
but the imei become lik this 004999010640000 
I9300_Repair_efs.tar.rar



* if yur imei is null yu cant repair using this box so 1st yu have to repair the efs using above givn file. if yur imei bcome lik tis oly (004999010640000) yu can repair using z3x or othr samsung tool

* Now follw the picr to repair imei problem.





* After IMEI Repair 



I hope this post wil helpful for lotz of dem  

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running

Pangu Download

A group of Chinese hackers calling themselves “PanGuTeam” have released the a jailbreak for iOS 8 – iOS 8.1, making it the first jailbreak for iOS 8, and also iPhone 6, iPhone 6 Plus, iPad Air 2 and iPad mini 3. It works with all the iOS 8 – 8.1 compatible devices:

• iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5 and iPhone 4s
• iPad Air, iPad 4, iPad 3 and iPad 2
• Retina iPad mini, 1st gen iPad mini
• 5th generation iPod touch

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running iOS 8 – iOS 8.1:

Latest version:

• Pangu 8 1.2.1
  • Windows version – [Official, Mirror]

• Pangu 8 1.0.0
  • Mac version – [Official, Mirror]

Older versions:

• Pangu 8 1.1.0
  • Windows version – [Official]

How to Jailbreak iOS 8.1 – iOS 8.0.x with Pangu

If you need help on how to use Pangu to jailbreak your iPhone, iPad or iPod touch running iOS 8.0.x – iOS 8.1, follow our latest step-by-step guide.

➤ How to jailbreak iOS 8.1 – iOS 8 and install Cydia using Pangu Jailbreak

To Jailbreak iOS 7.1.2 – iOS 7:

Pangu also supports the following devices running on iOS 7.1 – iOS 7.1.2:

• iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S and iPhone 4
• iPad Air, iPad 4, iPad 3, iPad 2
• iPad mini, Retina iPad mini
• iPod touch 5G

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running iOS 7 – iOS 7.1.2:

• Pangu 1.2.1
  • Windows version –  [Official, Mirror]

• Pangu 1.2.0
  • Mac version – [Official, Mirror]

Direct download link for all the older version of Pangu jailbreak:

• Pangu 1.2.0
  • Windows version –  [Official, Mirror]
• Pangu 1.1.0
  • Windows version –  [Official, Mirror]
  • Mac version – [Official, Mirror]

• Pangu 1.0.0 [Windows]

How to Jailbreak iOS 7.1 – iOS 7.1.2 with Pangu

If you need help, follow our latest step-by-step guide to jailbreak your iOS device.

• How to jailbreak iPhone, iPad and iPod touch running iOS 7.1.2 – iOS 7.1 using Pangu

If you’re on iOS 7.0.6 or lower then check this webpage for links to the latest tutorials on how to jailbreak your iOS device.

As always, let us know how it goes in the comments.

Zigo T661 Flah File

  Zigo T661 CPU- MTK  Flah File

                                                             Download

                                            Password - zakirgsm

Do Smail Flash File

Do Smail CPU- SPD SC6531 only  Flah File

                                                              Download

                                      Password - zakirgsm

i9500 Root

Hey Friends! In this thread I will show you how to root the galaxy S4 in an easy and safe way using CF Auto root.
This thread is for beginners that they don't want to lose data By rooting there devices.
This method will work even on android 4.2.2 or 4.3

Disclaimer:No developer will be responsible if you Brick your device





First of all,Check these requirements:
Your device must be charged
You have to enable USB Debugging by going to" About device" and Hit 8 times at the build number than go to developer option and enable the USB debugging.
Disable Kies and antivirus in your PC in case they stopped the operation
GT-I9500 ONLY
Have some patient

Now Rooting the device:
Download the CF Auto Root package from here http://download.chainfire.eu/326/CF-...xx-gti9500.zip and don't extract.
Download the odin3 package and extract
Now in your galaxy S4,boot into download mode by pressing Volume Down+Home+Power
Open odin3 and connect your S4 to your computer,Now ID:COM will turn blue
"Auto Reboot" and "F.Reset Time" must be Checked and "Repartion" must Be UNCHECKED
Now Press PDA and select the CF Auto Root package that you have downloaded
Press start and wait few Seconds to Odin finish the operation,You will see PASS in odin when it is completed
Now Your phone Will Reboot into recovery mode and Root your device Itself

NOTE:If your device make a normal boot and does not boot into recovery mode just pull the battery out and insert it again and boot into recovery by pressing Volume up+Home+Power and the phone will start the root process.

Voila!Your galaxy S4 is now successfully rooted!