Galaxy S4 Sim-Unlocking

1. Dial *#0011#
2. press Menu then tap BACK
3. press the Menu again the tap KEY INPUT then enter 1, (wait a few seconds) it auto jumped into service menu.

4. press Menu then tap BACK (not needed for me)

Your are now in the SERVICE MODE MAIN MENU

Tap [1]UMTS (may auto go into next menu (mine did)

then [1]DEBUG SCREEN 
then [6]PHONE CONTROL
then [6]NETWORK LOCK
then tap [3]PERSO SHA256 OFF

Go back to the UMTS MAIN MENU by pressing Menu then Back (several times) 

then tap [6]COMMON

then [6]NV REBUILD (if this does not work next time)

do [4]RESTORE BACK UP

the device will freeze, black screen, Blue LED Light, Menu and Back key ON. Wait for it to reboot (about a minute).

Your Samsung Galaxy I9505 is now Sim-Unlocked

...:::ZAKIR GSM:::...

MxBox v3.5 Revision 2.6 Latest Setup Download

MXBOX v3.5 revision 2.6

...:::ZAKIR GSM:::...

NOKIA module updated to version 2.6

- added: WP8 support 
Refurbish Flashing support by USB
Recovery(Dead) Flashing support by USB

- added: Service Utility for WP8
Factory Reset without flashing
Read/Write Producttion Data(Product Code,PSN,HW version, etc ..)*
Read/Write WP8 NV items )*
Read/Write WP8 CERTIFICATE(NPC,CCC,HWC,RDC)*
Write CoverColor *

- added: SuperDongle Auth for WP8 phones
SuperDongle Auth is required to write important/secure data

- bugfixed: RAPUV2 security repair function

- revised internal fire module to enable download firmware package by product code

- added latest flash update v 12.46.000.1 to setup

- minor bugfix


* Write function require SuperDongle Auth



SL3 Logger updated to version 2.6
- minor bugfix and improvements 

FIRE module updated to version 1.5
- minor bugfix and improvements


DOWNLOAD LINK MXBOX v3.5 revision 2.6
* rename file as .zip

How to update Huawei U8500 to froyo(android 2.2)?

This HOWTO describes the procedure to update Huawei U8500 firmware from eclair to froyo. The steps are simple.

1. Download the firmware that is U8500 V100R001C278B712
2. After the file is downloaded to your computer, extract it.
3. The extracted folder will contain folder named dload which will contain file updata.app.
4. Copy the folder (dload) to the root of SD card. So that the directory path is ⁄sdcard⁄dload.
5. Power off the phone.
6. Press end key (key used to hang up the call) + volume up key + power button. The screen may read Update failed. If such is the case remove the battery, plug in the battery and try again. The phone will reboot after the firmware upgradation is sucessful and there you are with Froyo. Happy Froy

UFS New update 2.3.0.0

UFS New update 2.3.0.0 Download

s5230 freeze problem 100% Success

s5230 freeze problem 
put a non accepted sim and
power on
show only 2 option 
1 SOS
2ND CALL 
press call u will look keypad then give freeze code and press # 
then ask fr net code then give net code and press # u r set will unlock



[FREZEE]:28085157
[NET LOCK]:97970868
[Subset LOCK]:00000000
[SP LOCK]:86480969
[CP LOCK]:00000000
Decrypted time: 41 sec
Elapsed time: 52 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------

Nokia 110 Successfully Flash Via usb byMX BOX [Pinout Inside]

Successfully Flash Nokia 110 Via usb by MX BOX [Pinout Inside]

MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C087D514
Using device: USB Phonet  and HTI, FW ver: 00.50, SN: 0100EC4F
Connection status: UHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75 
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 18DAA988
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.37
 EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD__back.RPL)
Processing file: 3998CC21_rm827__03.04.mcusw
 Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.813 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 33.000 s
Checksum verified (0x74A0)
Processing file: E3E09E22_rm827__03.04.ppm_m1
 Downloading item CUST:package_m1.ppm_ebl_psi.fls, num block: 1, size: 3.87 MB
Erasing area 0x41BC0000-0x41F9F0A2 ...OK
Programming completed in 5.641 s
Checksum verified (0x96D6)
Processing file: 3A4647A9_rm827__03.04.image_m1_059N416
 Downloading item CUST:package_m1_059N416.image.fls, num block: 1, size: 14.25 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 22.469 s
Checksum verified (0x8213)
Total time for flashing process(boot+erase+write) was 8 min 10.328 s
Waiting for USB device removal ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 1210982C
Verifying communication to device OK.



Phone type: RM-827 (Nokia 110)
SW version: V 03.04 20-04-12 RM-827 (c) Nokia             
Imei plain: 35325805139788-0
Product code: 059N2R6
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: NI00CS0000040C21AC67, ver: 004.032

SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 35325805139788
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK

Completed in 0.141 s

E2230 Success Unlock Z3X

Selected model: E2230
Selected com port: COM8
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RVOB644911
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 4 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*00000000# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*00000000# this is Master(freeze) code
                                      
Read info - ok
Elapsed time: 36 second, sw ver: 3.5.0040
http://forum.gsmhosting.com/vbb/f453/e2230-success-unlock-z3x-zakir-gsm-1686667/