cricket

Friday, July 19, 2013

Nokia 110 Successfully Flash Via usb byMX BOX [Pinout Inside]

Successfully Flash Nokia 110 Via usb by MX BOX [Pinout Inside]



MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C087D514
Using device: USB Phonet  and HTI, FW ver: 00.50, SN: 0100EC4F
Connection status: UHCI:HUB:HUB::USB 1.10 (Full-speed)
Driver: nmwcdnsuc, ver: 7.1.32.75 
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 18DAA988
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.37
 EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD__back.RPL)
Processing file: 3998CC21_rm827__03.04.mcusw
 Downloading item CODE:rm827__03.04.mcusw_ebl_psi.fls, num block: 4, size: 26 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.813 s
Erasing area 0x40280000-0x41B3FFFE ...OK
Programming completed in 33.000 s
Checksum verified (0x74A0)
Processing file: E3E09E22_rm827__03.04.ppm_m1
 Downloading item CUST:package_m1.ppm_ebl_psi.fls, num block: 1, size: 3.87 MB
Erasing area 0x41BC0000-0x41F9F0A2 ...OK
Programming completed in 5.641 s
Checksum verified (0x96D6)
Processing file: 3A4647A9_rm827__03.04.image_m1_059N416
 Downloading item CUST:package_m1_059N416.image.fls, num block: 1, size: 14.25 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 22.469 s
Checksum verified (0x8213)
Total time for flashing process(boot+erase+write) was 8 min 10.328 s
Waiting for USB device removal ... 
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: 1210982C
Verifying communication to device OK.



Phone type: RM-827 (Nokia 110)
SW version: V 03.04 20-04-12 RM-827 (c) Nokia             
Imei plain: 35325805139788-0
Product code: 059N2R6
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: NI00CS0000040C21AC67, ver: 004.032

SIMLOCK seems to be valid
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 35325805139788
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000004000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK

Completed in 0.141 s

0 comments:

Post a Comment

Label 3