How To Root Samsung Galaxy Pocket NEO GT-S5310

Root Galaxy Pocket Neo GT-S5310

Want to root your samsung galaxy neo gt-s5310??

Then follow the procedure given below to get your neo successfully rooted.

Note:Do this on your own risk,rooting voids the warranty of your device.

Image Source: Samsung.com

Before You Start:

1. Install USB Drivers for Samsung Galaxy Pocket NEO on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy Pocket Neo by selecting Settings >> About Phone.

Necessary Downloads:

1. CWM Recovery

2. Odin

3. Update Package for Rooting

4. Samsung Drivers\kies

Procedure To Root Your Device:

1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.

2. Run ODIN 3.0.7. Don't change any setting (checkboxes) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38" or Turn to Yellow) - if not check if your USB port is functional and Samsung drivers installed correctly.

3. Click on PDA button and chose CWM recovery (downloaded). Don't rename or decompress the file.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.

4. Copy update package for rooting on SD card and put the card in device's slot.

5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root Superuser.zip file and press power button again. 

That's it you have successfully rooted your galaxy pocket neo.For any suggestions,help and questions leave a comment below.

Official Thread: XDA

Micromax A59 Hard Reset Done 100%

Hold Power Sortly Just Vibrate Immediatly Click Vol Down Long 2 sec Show Android Logo
Hold Vol-Up Option Show
1-reboot system now
2-apply update from adb
3-wipe data/factory reset
etc 

MTK USB Driver

ALL MTK USB Driver 2013

 New Update V0.8

( Win xp+Win 7+Win 8+Vista-32/64 )

Download

Password - zakirrgsm

Lafone Flash File

 MTK Lafone Download

Password - zakirrgsm

Upgrading OS10 devices using Autoloader

 [ Edited ]

Options

‎07-07-2013 10:57 AM - last edited 3 weeks ago by Steve_T 

If you need to upgrade your operating system (OS) and your BB10 device won't upgrade otherwise; or if your over-the-air upgrade failed, try this process.

This is also a good process IF you want a complete wipe and new OS installed to start with a like-factory fresh device.

(there is also a good illustrated step by step located here.)

If you are not experiencing device issues, and need to upgrade with a less-invasive OS install (you don't need a device wipe and don't want to overwrite your settings and data), use this method described here:  Upgrading BB10 OS Using Sachesi

• These directions apply to Z30, Z10, Q10 and Q5 models.

Check your Model Number at Settings > About > Model Number, and make sure you download the corresponding file below!

10.2.1 files

(OS 10.2.1.537 and 10.2.1.2102 have been officially released by BlackBerry and most carriers have begun to roll it out to users.)

• Software version 10.2.1.3175 
• For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.3175  file here
• For Z10 model STL100-1: Download Download 10.2.1.3175  file here
• For Z10 models STL100-2, -3, -4: Download 10.2.1.3175  file here
• For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.3175  file here
• For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.3175  file here

• Software version 10.2.1.2273 
• For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2273  file here
• For Z10 model STL100-1: Download Download 10.2.1.2273  file here.
• For Z10 models STL100-2, -3: Download 10.2.1.2273 file here.
• For Z10 models STL100-4: Download 10.2.1.2273  file here.
• For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2273 file here.
• For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2273 file here.

• Software version 10.2.1.2102 (same as OS version 10.2.1.2141)
• For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2102 file here
• For Z10 model STL100-1: Download Download 10.2.1.2102 file here
• For Z10 models STL100-2, -3, -4: Download 10.2.1.2102 file here
• For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2102 file here
• For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2102 file here

• Software version 10.2.1.537 (same as OS version 10.2.1.1925)
• For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.1925 file here
• For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925 file here
• For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.1925 file here
• For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.1925 file here

10.2.0 files

(OS 10.2.0.1803 has been officially released by BlackBerry and the carriers have begun to roll it out to users.)

• For Z30 models STA100-1, -2, -3, -4, (all): Download the 10.2.0.1803 OS files here.
• For Z10 model STL100-1: Download the 10.2.0.1803 OS files here.
• For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS files here.
• For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download the 10.2.0.1803 OS files here.
• For Q5 models SQR100-1, -2, -3 (all): Download the 10.2.0.1803 OS files here.

10.1 files

(OS 10.1.0.4537 and 10.1.0.4633 have been officially released by BlackBerry and the carriers around the world are beginning to roll it out to users.)

• For Z10 models 100-1, -2, -3, -4: Download the 10.1.0.4537 OS file here
• For Z10 models 100-1: Download the 10.1.0.4633 OS file here
• For Z10 models 100-2, -3, -4: Download the 10.1.0.4633 OS file here
• For Z10 models 100-2, -3, -4: Download the 10.1.0.4687 OS file here

• For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4633 OS file here
• For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4687 OS file here

• For Q5 models, download the 10.1.0.4633 OS file here

(you can use these directions with any OS version, I've only posted these releases linked above)

Remember, this process will totally wipe your device, so the backup is important.

1. Download the file above to a Windows PC. Extract it from the ZIP file if it is zipped. If it is a ".rar" file, you will need a WinRar unpacking app on your PC to extract the file.
2. Connect your BlackBerry to the PC. Using Link, do a backup* (see below) of your phone.
3. Locate the downloaded file and run the autoloader (double click on the EXE file) and a black DOS window appears indicating "Connecting to bootrom". The DOS window processes the install, and begins to load the OS. If you have a security passwored, you will be asked to enter it.
4. When the OS loading is complete, your Z10 will reboot. Disconnect from the PC, and the device will startup.
5. Optional but recommended: Wipe your device at your Settings > Security > Security Wipe. This can take 30 mins to an hour.
6. Go through the required device setup of connecting to WiFi, Agreements, enter your BlackBerryID, and Get Acquainted screens.
7. Reconnect to the PC and perform your restore using BlackBerry Link.
8. Now, you will need to re-enter account passwords for email, Twitter, Facebook, etc.

Backup Notes: When you backup using Link, you can make one total backup, or divide that backup into three different databases (Setup | Media | App Data). I always break that backup into the three different databases so that I can restore each separately because I have had some issues with a full restore failing in the App database restore, so then I can safely restore only Settings and Media.

Remember, this process does totally wipe your device, so the backup is important. Reserve about two hours time for the process... performing the backup and restore takes the longest part of the time and will vary according to the amount of data and apps on your BlackBerry.

Post Upgrade device lag, heat, fast battery discharge:  After any OS upgrade on a BB10 device, it will take 48-72 hours for the device data syncing of email, contacts, social apps, etc., to complete and finish. High data transfer after an upgrade cause high processor use, which in turn causes high battery usage, which in turn can cause higher than nornal heat from the device. Likewise, high processor use will cause some lag and initial slowness. Ignore and and be patient. It can take the 48 hours for all contacts to sync back to the device. Connect to a good WiFi source and relax. The battery will recover after a few days and you'll see normal battery usage again. Just don't drain your battery to 10% or less each time, top off the charge. You'll notice a difference after a couple days.

That said, it's relatively easy to do and your device will love it

iphone 3gs 6.1.6 untethered jailbreak unlock susesfull

3gs iPhone2,1_6.1.6_10B500_Restore untethered jailbreak & unlock

1) Restore your device with iPhone2,1_6.1.6_10B500
2) Jailbreak
2.1) Open redsn0w_win_0.9.15b3
2.2) Go to extra
2.3) Go to select ipsw
2.4) Select iPhone2,1_6.0_10A403_Restore
2.5) Back
2.6) Jailbreak
2.7) Next, follow the instructions to enter dfu mode
2.8) Check install cydia & install ipad baseband 
2.9) Wait until jailbreak done

3) There will be no cydia in your device
3.1) Open redsn0w_win_0.9.15b3
3.2) Go to extra
3.3) Go to select ipsw
3.4) Select iPhone2,1_6.0_10A403_Restore
3.5) Go To Just boot
3.6) Follow the instructions to enter dfu mode
4) after device on u can see cydia
5) Open Cydia.
6) Click the "Changes" tab in the footer.
7) Press the "Refresh" button in the top left corner.
8) After "Reloading Data", perform a search for "p0sixspwn" (the O is a zero).
9) Tap Install.
10) After installing p0sixspwn your device is untethered
11) Install ultrasnow 1.2.8


1000% network done

Micromax X098 Flash File

SPD-SC6531 Micromax X098 Download

Password - zakirrgsm