Support:* RPL Get just in 5 Sec.* Dct4, DCT4+, Tiku, WD2* All asic 2,5,6,7,11 supported* Use UFS/HWK/Twister/Power Flasher as interface!!!* Also working with cloned box
pattern lock, google account lock how to reset 1.switch on mobile "mobile show google lock" 2.then go to emergency call press this code*#*#7378423#*#* after pressing key display show four option *service info *service setting *service texts *customization setting 3.choose "customization setting" 4.then press "reset customization" phone will reboot & reset
This method is done on Windows. I recommend this way as its the easiest. If you don't have Windows, borrow from a friend. ◄●Downloading Files and Installing Drivers●►
Extract the zip file by right clicking and selecting "Extract All," or by using an extracting program of your choice.
Open the folder and double click the driver file labeled "GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe"
Install the driver. Its pretty much just Next, Next, Install, and Exit when its done.
◄●Connecting the Device●►
Turn on USB Debugging by going to Settings>Applications>Development and checking USB debugging. Click Okay to confirm
Power off the device by holding the power button and selecting Power off
Put the device into Downloading mode
Hold the Vol Down button (the left Volume button) and then hold the Power button as well.
Keep holding until you see two icons. First you'll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
Press the Vol Up button (the right Volume button) to select Downloading mode.
Connect the device to your computer with the USB cable.
◄●Flashing a Custom Recovery●►
Go into the same root folder as before.
Double click the root application named "Odin3_v1.85.exe"
Select PDA
Double click the clockworkmod recovery file labeled "recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5" to select it.
Click Start
Once it is complete, you can close the program
◄●Completing the Root●►
Disconnect your USB cable
On your device, turn off USB Debugging by going to Settings>Applications>Development and unchecking USB debugging
Plug your USB cable back in
On your computer, go to the same root folder as before and transfer
the zip file labeled "Samsung_Galaxy_Tab_10.1_root.zip" to your device.
Don't put it inside any folder.
Confirm that it was transferred by clicking inside the device folder
Power off the device by holding the power button and selecting Power off
Put the device into Recovery mode
Hold the Vol Down button (the left Volume button) and then hold the Power button as well.
Keep holding until you see two icons. First you'll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
Press the Vol Down button (the left Volume button) to highlight the left icon.
Press the Vol Up button (the right Volume button) to select Recovery mode.
You should see that you are in ClockworkMod Recovery. If not, start over
Use the volume buttons to highlight "Install zip from SD card" and hit the Power button to select it.
Use the volume buttons to highlight "Choose zip from SD card" and hit the Power button to select it.
Use the volume buttons to highlight "Samsung_Galaxy_Tab_10.1_root.zip" and hit the Power button to select it.
Use the volume buttons to highlight "Yes - Install..." and hit the Power button to select it.
When it finishes, the last line should say "Install from sdcard complete."
Use the volume buttons to highlight "*****Go Back*****" and hit the Power button to select it.
Hit the Power button to select "reboot system now"