cricket

Thursday, December 25, 2014

samsung galaxy s3 imei null null baseband unknown Done 100% ...:::ZAKIR GSM:::...



       More infor
Posted by Unknown at 10:00 AM 0 comments

Monday, December 22, 2014

success fully Change Galaxy S III glass By separator machine


Posted by Unknown at 11:08 PM 0 comments

Download iOS 8.1.2 Links For iPhone, iPad, iPod touch

iOS 8.1.2 Download Links:
Posted by Unknown at 8:44 AM 0 comments

Sunday, December 21, 2014

Samsung i9070 Auto Restart Problem 100% Done

Downloads:
  • First of all download the following Gingerbread firmware for Galaxy S Advance GT-I9070. The provided 7zip file contains all required stuff (see below), such as the Odin3 tool and the PIT file. Having downloaded it, extract the file on your desktop : Download Firmware and Tools   —  Mirror Link



  • In case you have the 16 GB variant of the Galaxy S Advance, download the following re-partition file with .pit extension: GT-I9070_EUR_XX_16G_20111228_KL8.pit
  • Download and install Samsung USB Drivers on your computer: Download
Preparations:
  • Back  up your phone,s contacts, messages, apps, call-logs because downgrading will wipe all data present on the internal storage of your phone. Use these apps for backing up all data.
  • Charge your phone’s battery to the full of its capacity.
  • Open Settings> Developer Options and turn on USB Debugging mode.
  • You must also have the USB cable that came with your phone.

Downgrading to Gingerbread on Galaxy S Advance

Make sure you have made all required preparations mentioned above and have the downloaded files on your computer, and then proceed to follow the following steps carefully.
  1. Turn of your Galaxy S Advance, and put it into Download mode. If you do not know how to do it, here is the method: press and hold Volume Down + Home + Power buttons simultaneously for about 3 seconds till you see a warning screen. Then press the Volume Up key and your phone will enter Download mode.
  2. Now open the firmware package you downloaded and launch Odin3 v1.85 as administrator. When it is opened, connect your phone to computer using the USB cable.
  3. Wait till Odin detects your phone and when it does it, the ID:COM port will turn yellow.
  4. Now click on PDA button on the Odin tool, navigate to the firmware folder and select the file with CODE in its name: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_8G.tar.md5
  5. Next, click the CSC button and select: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
  6. Then, click the PIT button and select the .pit file depending on your phone’s memory (8 or 16 GB). Ours is the 8 GB version so we selected: GT-I9070_EUR_XX_8G.pit
  7. Next, make sure that “Re-Partition”, “Auto Reboot” and “F Reset Time” options are checked on Odin.
  8. Now you are just a click away from rolling back to the Gingerbread firmware on your Galaxy S Advance. Just click the “Start” button and wait till the installation is completed.Galaxy-S-Advance-Downgrage-GB-Odin-pass
  9. Finally, you will get a PASS!! message with green color indicating that the firmware has been flashed successfully. Your phone will then reboot automatically and it will have the newly installed Gingerbread firmware now.

What If I Get a Bootloop after Downgrade:

Well, we have tested this method and it worked without any mishap or hindrance but it is not necessary that things go nice for everyone. In case you phone does not boot properly even after getting PASS!! message at Odin, follow the following troubleshooter:
  1. Pull out your phone’s battery, wait for a minute and reinsert it back to its place.
  2. Then boot your Galaxy S Advance into recovery mode: press and hold Volume Up + Home + Power keys for about 5 seconds till the Samsung logo with device name blinks for 2 times followed by a black screen with an Android bot and blue menu. This is called stock recovery mode and here you will have to use the Volume keys to scroll and highlight options and the Power key to select them.
  3. Now scroll down to “wipe data/factory reset” option and confirm your selection.
  4. Next scroll to “wipe cache partition” and wipe it too.
  5. Finally select “reboot system now” option.
Your phone should boot now and if it is still stuck at bootloop, try installing the firmware again and more carefully. Remember, if you encounter an error, it’s most probably a mistake made on your part.

Installing Official GB Firmware for Your Country:

In case, you wish to install the official firmware meant for your own country, download the Gingerbread firmware from here and install it using Odin. To find the firmware for your country, open the firmware site, press Ctrl+F and type the CSC code for your country/region. To find the CSC code for your country, Click Here.
There will be some difference in the above procedure to install regular firmware. Here are the quick steps:
  1. Download desired firmware.
  2. Make all preparations as directed above.
  3. Enter device into Download mode
  4. Launch Odin3_v1.85.zip  and connect the phone to PC.
  5. Click on PDA button and select the file with .tar.md5 extension.
  6. Hit Start button.

So this was our easy-peasy tutorial for downgrading firmware on Galaxy S Advance GT-I9070. If our attempt helped you, do not forget to share your experience with us. For more useful tutorials and stuff on Android, join us on Facebook, Google+, or Twitter. Cheers!
Posted by Unknown at 10:15 PM 0 comments

Friday, December 19, 2014

MT65xxb GT-i9190 imei repair Done 10000% By VOLCANO

COM port searching and preloader handshake.
  Connect successfully.
  CPU TYPE:MT6572, E01
  DSP Firmware Version:2000.00.00
  DSP Patch Version:1.0
  Software Version:MOLY.WR8.W1315.MD.WG.MP.V1
  Hardware Version:SANSTAR72_WET_JB3_HSPA_HW
  Audio Version:Unknown
  IMEI1:invalid.      
  IMEI2:invalid.      
>>IMEI success.


Posted by Unknown at 4:10 AM 0 comments

Wednesday, November 26, 2014

Uni-Android Tool Beta


                                 Download   Uni-Android Tool Beta Test ZAKIR GSM
Posted by Unknown at 7:37 AM 0 comments

Monday, November 24, 2014

Samsung s3 i9300 & Note2 N7100 & i9500 s4 Dead boot repair solution & imei null solution only for i9300

Procedure:
* Download samsung s3 boot card maker Here

* Extract it on desktop

* Take a card reader insert memory card into the card reader nd connect it to the pc

* From the extracted folder run Diskdump2.exe

* Select generic storage Device. pictures below follw it


* Now to write the scripts folle the below given picr



Now done yu are succesfully created Dead boot memorycard

To continue further 

Requerments:

* Z3X samsung Box or SPT Box (i used z3x)

* special UART Cable (300k or 500k uartcable)

* Download teraterm-4.78 From Here

* Fully charged battery

Dead boot Reapairing procedure

* Download nd extract teraterm-4.78 on desktop

* From extracted folder run ttermpro.exe there select serial port nd change the serial port to z3x serial
port lik below givin in the picr



*After Select The Serial Port Press Ok Button den Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button lik below givn in the picr





* Now insert the created boot card to the mobile

* Connect the Uart cable via z3x box

* Now Insert the battery nd wait for 5min if the procces didnt start discnnt the mobile close ttermpro agin try it.

* if it run success yu vil the result below given lik this.

Quote:
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,


* if yu get this error at the end [Patch Stop] This is not Rom Code. yu cant fix yur mobile yu have to change yur emmc chip

Quote:
TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.


* After done this yur mobile must me n download mode or white screen if white screen manually put into download mode.

* After dead boot repair mine white screen i manually put into download mode pir below


* Now update your mobile with factory firmware with PIT file lik below given n the picr.Factory firmwareDownload Here



* After update complete yur mobile may not have imei .imei null or yur mobile will not boot bcoz of dead boot repair. yur efs must be corrupted

* To Fix this prob first root yur mobile Download from here (flash it through odin select as odin) 

* Now Download this EfS repair file nd flash it through odin select as odin yur mobile must boot
but the imei become lik this 004999010640000 
I9300_Repair_efs.tar.rar



* if yur imei is null yu cant repair using this box so 1st yu have to repair the efs using above givn file. if yur imei bcome lik tis oly (004999010640000) yu can repair using z3x or othr samsung tool

* Now follw the picr to repair imei problem.





* After IMEI Repair 



I hope this post wil helpful for lotz of dem  
Posted by Unknown at 11:20 PM 0 comments

Wednesday, November 19, 2014

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running

Pangu Download

Pangu Jailbreak for iOS 8 - iOS 8
A group of Chinese hackers calling themselves “PanGuTeam” have released the a jailbreak for iOS 8 – iOS 8.1, making it the first jailbreak for iOS 8, and also iPhone 6, iPhone 6 Plus, iPad Air 2 and iPad mini 3. It works with all the iOS 8 – 8.1 compatible devices:
  • iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5 and iPhone 4s
  • iPad Air, iPad 4, iPad 3 and iPad 2
  • Retina iPad mini, 1st gen iPad mini
  • 5th generation iPod touch

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running iOS 8 – iOS 8.1:

Latest version:
Older versions:
  • Pangu 8 1.1.0

How to Jailbreak iOS 8.1 – iOS 8.0.x with Pangu

If you need help on how to use Pangu to jailbreak your iPhone, iPad or iPod touch running iOS 8.0.x – iOS 8.1, follow our latest step-by-step guide.

To Jailbreak iOS 7.1.2 – iOS 7:

Pangu also supports the following devices running on iOS 7.1 – iOS 7.1.2:
  • iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S and iPhone 4
  • iPad Air, iPad 4, iPad 3, iPad 2
  • iPad mini, Retina iPad mini
  • iPod touch 5G

Download Pangu Jailbreak to Jailbreak iPhone, iPad and iPod touch running iOS 7 – iOS 7.1.2:

Direct download link for all the older version of Pangu jailbreak:

How to Jailbreak iOS 7.1 – iOS 7.1.2 with Pangu

If you need help, follow our latest step-by-step guide to jailbreak your iOS device.
If you’re on iOS 7.0.6 or lower then check this webpage for links to the latest tutorials on how to jailbreak your iOS device.
As always, let us know how it goes in the comments.
Posted by Unknown at 8:52 AM 0 comments

Thursday, October 2, 2014

Zigo T661 Flah File

  Zigo T661 CPU- MTK  Flah File


                                                             Download
                                            Password - zakirgsm
Posted by Unknown at 2:27 AM 0 comments

Friday, September 26, 2014

Do Smail Flash File

Do Smail CPU- SPD SC6531 only  Flah File

                                                              Download
                                      Password - zakirgsm
Posted by Unknown at 8:42 PM 0 comments

Thursday, September 18, 2014

i9500 Root

Hey Friends! In this thread I will show you how to root the galaxy S4 in an easy and safe way using CF Auto root.
This thread is for beginners that they don't want to lose data By rooting there devices.
This method will work even on android 4.2.2 or 4.3

Disclaimer:No developer will be responsible if you Brick your device





First of all,Check these requirements:
Your device must be charged
You have to enable USB Debugging by going to" About device" and Hit 8 times at the build number than go to developer option and enable the USB debugging.
Disable Kies and antivirus in your PC in case they stopped the operation
GT-I9500 ONLY
Have some patient

Now Rooting the device:
Download the CF Auto Root package from here http://download.chainfire.eu/326/CF-...xx-gti9500.zip and don't extract.
Download the odin3 package and extract
Now in your galaxy S4,boot into download mode by pressing Volume Down+Home+Power
Open odin3 and connect your S4 to your computer,Now ID:COM will turn blue
"Auto Reboot" and "F.Reset Time" must be Checked and "Repartion" must Be UNCHECKED
Now Press PDA and select the CF Auto Root package that you have downloaded
Press start and wait few Seconds to Odin finish the operation,You will see PASS in odin when it is completed
Now Your phone Will Reboot into recovery mode and Root your device Itself

NOTE:If your device make a normal boot and does not boot into recovery mode just pull the battery out and insert it again and boot into recovery by pressing Volume up+Home+Power and the phone will start the root process.

Voila!Your galaxy S4 is now successfully rooted!
Posted by Unknown at 3:07 AM 0 comments

Saturday, August 16, 2014

E-tel ET230 MTK Flah File

E-tel ET230 MTK CPU TYP E6252
Posted by Unknown at 10:02 PM 0 comments

Saturday, August 9, 2014

Huawei Tablet s7-701u Hard Reset


  Huawei Tablet s7-701u Hard Reset 
Procedure: Hard Reset | Factory Reset

1. Press and hold the power button + volume up + volume down. 
2. When you feel the vibration,release the power button. 
3. When the Android logo appears, release the volume up. 
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it. 
5. Then let it reboot by itself. 
6. Hard reseting done.
 
Posted by Unknown at 10:08 PM 0 comments

Tuesday, August 5, 2014

Micromax A54 Flash File

Micromax A54 
Posted by Unknown at 9:12 PM 0 comments

Sunday, August 3, 2014

How To Root Samsung Galaxy Pocket NEO GT-S5310

Root Galaxy Pocket Neo GT-S5310

Want to root your samsung galaxy neo gt-s5310??

Then follow the procedure given below to get your neo successfully rooted.

Note:Do this on your own risk,rooting voids the warranty of your device.
Image Source: Samsung.com


Before You Start:

1. Install USB Drivers for Samsung Galaxy Pocket NEO on your computer.(Link given below)

2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The device should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the device is charged more than 80 percent.

6. Verify the model number of the Galaxy Pocket Neo by selecting Settings >> About Phone.

Necessary Downloads:

1. CWM Recovery

2. Odin

3. Update Package for Rooting

4. Samsung Drivers\kies

Procedure To Root Your Device:

1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.

2. Run ODIN 3.0.7. Don't change any setting (checkboxes) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38" or Turn to Yellow) - if not check if your USB port is functional and Samsung drivers installed correctly.

3. Click on PDA button and chose CWM recovery (downloaded). Don't rename or decompress the file.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.

4. Copy update package for rooting on SD card and put the card in device's slot.

5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root Superuser.zip file and press power button again. 

That's it you have successfully rooted your galaxy pocket neo.For any suggestions,help and questions leave a comment below.

Official Thread: XDA
Posted by Unknown at 11:40 PM 0 comments

Monday, July 28, 2014

Micromax A59 Hard Reset Done 100%


Hold Power Sortly Just Vibrate Immediatly Click Vol Down Long 2 sec Show Android Logo
Hold Vol-Up Option Show
1-reboot system now
2-apply update from adb
3-wipe data/factory reset
etc 
Posted by Unknown at 3:07 AM 0 comments

Tuesday, July 15, 2014

MTK USB Driver

ALL MTK USB Driver 2013
 New Update V0.8

( Win xp+Win 7+Win 8+Vista-32/64 )

Password - zakirrgsm
Posted by Unknown at 2:28 AM 0 comments

Friday, July 11, 2014

Lafone Flash File


 MTK Lafone Download

Password - zakirrgsm


Posted by Unknown at 10:15 PM 0 comments

Wednesday, July 9, 2014

Upgrading OS10 devices using Autoloader

Upgrading OS10 devices using Autoloader

 [ Edited ]
‎07-07-2013 10:57 AM - last edited 3 weeks ago by  Moderator
If you need to upgrade your operating system (OS) and your BB10 device won't upgrade otherwise; or if your over-the-air upgrade failed, try this process.
This is also a good process IF you want a complete wipe and new OS installed to start with a like-factory fresh device.
(there is also a good illustrated step by step located here.)

If you are not experiencing device issues, and need to upgrade with a less-invasive OS install (you don't need a device wipe and don't want to overwrite your settings and data), use this method described here:  Upgrading BB10 OS Using Sachesi

  • These directions apply to Z30, Z10, Q10 and Q5 models.
Check your Model Number at Settings > About > Model Number, and make sure you download the corresponding file below!

10.2.1 files
(OS 10.2.1.537 and 10.2.1.2102 have been officially released by BlackBerry and most carriers have begun to roll it out to users.)

  • Software version 10.2.1.3175 
  • For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.3175  file here
  • For Z10 model STL100-1: Download Download 10.2.1.3175  file here
  • For Z10 models STL100-2, -3, -4: Download 10.2.1.3175  file here
  • For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.3175  file here
  • For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.3175  file here
  • Software version 10.2.1.2273 
  • For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2273  file here
  • For Z10 model STL100-1: Download Download 10.2.1.2273  file here.
  • For Z10 models STL100-2, -3: Download 10.2.1.2273 file here.
  • For Z10 models STL100-4: Download 10.2.1.2273  file here.
  • For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2273 file here.
  • For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2273 file here.
  • Software version 10.2.1.2102 (same as OS version 10.2.1.2141)
  • For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.2102 file here
  • For Z10 model STL100-1: Download Download 10.2.1.2102 file here
  • For Z10 models STL100-2, -3, -4: Download 10.2.1.2102 file here
  • For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.2102 file here
  • For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.2102 file here
  • Software version 10.2.1.537 (same as OS version 10.2.1.1925)
  • For Z30 models STA100-1, -2, -3, -4, (all): Download 10.2.1.1925 file here
  • For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925 file here
  • For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.1925 file here
  • For Q5 models SQR100-1, -2, -3 (all): Download 10.2.1.1925 file here

10.2.0 files
(OS 10.2.0.1803 has been officially released by BlackBerry and the carriers have begun to roll it out to users.)
  • For Z30 models STA100-1, -2, -3, -4, (all): Download the 10.2.0.1803 OS files here.
  • For Z10 model STL100-1: Download the 10.2.0.1803 OS files here.
  • For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS files here.
  • For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download the 10.2.0.1803 OS files here.
  • For Q5 models SQR100-1, -2, -3 (all): Download the 10.2.0.1803 OS files here.

10.1 files
(OS 10.1.0.4537 and 10.1.0.4633 have been officially released by BlackBerry and the carriers around the world are beginning to roll it out to users.)
  • For Z10 models 100-1, -2, -3, -4: Download the 10.1.0.4537 OS file here
  • For Z10 models 100-1: Download the 10.1.0.4633 OS file here
  • For Z10 models 100-2, -3, -4: Download the 10.1.0.4633 OS file here
  • For Z10 models 100-2, -3, -4: Download the 10.1.0.4687 OS file here
  • For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4633 OS file here
  • For Q10 models 100-1, -2, -3, -4, -5: Download the 10.1.0.4687 OS file here
  • For Q5 models, download the 10.1.0.4633 OS file here
(you can use these directions with any OS version, I've only posted these releases linked above)

Remember, this process will totally wipe your device, so the backup is important.

  1. Download the file above to a Windows PC. Extract it from the ZIP file if it is zipped. If it is a ".rar" file, you will need a WinRar unpacking app on your PC to extract the file.
  2. Connect your BlackBerry to the PC. Using Link, do a backup* (see below) of your phone.
  3. Locate the downloaded file and run the autoloader (double click on the EXE file) and a black DOS window appears indicating "Connecting to bootrom". The DOS window processes the install, and begins to load the OS. If you have a security passwored, you will be asked to enter it.
  4. When the OS loading is complete, your Z10 will reboot. Disconnect from the PC, and the device will startup.
  5. Optional but recommended: Wipe your device at your Settings > Security > Security Wipe. This can take 30 mins to an hour.
  6. Go through the required device setup of connecting to WiFi, Agreements, enter your BlackBerryID, and Get Acquainted screens.
  7. Reconnect to the PC and perform your restore using BlackBerry Link.
  8. Now, you will need to re-enter account passwords for email, Twitter, Facebook, etc.
Backup Notes: When you backup using Link, you can make one total backup, or divide that backup into three different databases (Setup | Media | App Data). I always break that backup into the three different databases so that I can restore each separately because I have had some issues with a full restore failing in the App database restore, so then I can safely restore only Settings and Media.

Remember, this process does totally wipe your device, so the backup is important. Reserve about two hours time for the process... performing the backup and restore takes the longest part of the time and will vary according to the amount of data and apps on your BlackBerry.

Post Upgrade device lag, heat, fast battery discharge:  After any OS upgrade on a BB10 device, it will take 48-72 hours for the device data syncing of email, contacts, social apps, etc., to complete and finish. High data transfer after an upgrade cause high processor use, which in turn causes high battery usage, which in turn can cause higher than nornal heat from the device. Likewise, high processor use will cause some lag and initial slowness. Ignore and and be patient. It can take the 48 hours for all contacts to sync back to the device. Connect to a good WiFi source and relax. The battery will recover after a few days and you'll see normal battery usage again. Just don't drain your battery to 10% or less each time, top off the charge. You'll notice a difference after a couple days.

That said, it's relatively easy to do and your device will love it
Posted by Unknown at 2:42 AM 0 comments

Label 3