DCT-4,DCT-4+ RPL Server

World's Fast FuFeNu RPL Server 

Support:* RPL Get just in 5 Sec.* Dct4, DCT4+, Tiku, WD2* All asic 2,5,6,7,11 supported* Use UFS/HWK/Twister/Power Flasher as interface!!!* Also working with cloned box

                FuFeNu Logger V_3.0  Free Download     
            ...:::ZAKIR GSM:::...

Digital Mic Ways

Android Tool

Android Tool   Free Download    ...:::ZAKIR GSM:::...

SonyEricsson ST18i Hard Reset

pattern lock, google account lock how to reset

1.switch on mobile "mobile show google lock"

2.then go to emergency call press this code *#*#7378423#*#*
after pressing key display show four option
*service info
*service setting
*service texts
*customization setting

3.choose "customization setting"

4.then press "reset customization" phone will reboot & reset

Galaxy Teb GT-p7510 10.1 root ZAKIR GSM

LINK TO VIDEO WALKTHROUGH FOR HOW TO ROOT THE Galaxy Tab 10.1 (WiFi) ...:::ZAKIR GSM:::...

◄●REQUIRED DOWNLOADS●►

Just download, do not install or run anything yet.

• Root.zip with all needed files

◄●Instructions●►

This method is done on Windows. I recommend this way as its the easiest. If you don't have Windows, borrow from a friend.

◄●Downloading Files and Installing Drivers●►

1. Download the root.zip I have linked.
2. Extract the zip file by right clicking and selecting "Extract All," or by using an extracting program of your choice.
3. Open the folder and double click the driver file labeled "GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe"
4. Install the driver. Its pretty much just Next, Next, Install, and Exit when its done. 
5. ◄●Connecting the Device●►
   
6. Turn on USB Debugging by going to Settings>Applications>Development and checking USB debugging. Click Okay to confirm
7. Power off the device by holding the power button and selecting Power off
8. Put the device into Downloading mode
   1. Hold the Vol Down button (the left Volume button) and then hold the Power button as well.
   2. Keep holding until you see two icons. First you'll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
   3. Press the Vol Up button (the right Volume button) to select Downloading mode.
9. Connect the device to your computer with the USB cable.

◄●Flashing a Custom Recovery●►

1. Go into the same root folder as before.
2. Double click the root application named "Odin3_v1.85.exe"
3. Select PDA
4. Double click the clockworkmod recovery file labeled "recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5" to select it.
5. Click Start
6. Once it is complete, you can close the program

1. ◄●Completing the Root●►
   
2. Disconnect your USB cable
3. On your device, turn off USB Debugging by going to Settings>Applications>Development and unchecking USB debugging
4. Plug your USB cable back in
5. On your computer, go to the same root folder as before and transfer the zip file labeled "Samsung_Galaxy_Tab_10.1_root.zip" to your device. Don't put it inside any folder.
6. Confirm that it was transferred by clicking inside the device folder
7. Power off the device by holding the power button and selecting Power off
8. Put the device into Recovery mode
   1. Hold the Vol Down button (the left Volume button) and then hold the Power button as well.
   2. Keep holding until you see two icons. First you'll see the Samsung Galaxy Tab 10.1 logo and then the icons will show up. Let go.
   3. Press the Vol Down button (the left Volume button) to highlight the left icon.
   4. Press the Vol Up button (the right Volume button) to select Recovery mode.
9. You should see that you are in ClockworkMod Recovery. If not, start over
10. Use the volume buttons to highlight "Install zip from SD card" and hit the Power button to select it.
11. Use the volume buttons to highlight "Choose zip from SD card" and hit the Power button to select it.
12. Use the volume buttons to highlight "Samsung_Galaxy_Tab_10.1_root.zip" and hit the Power button to select it.
13. Use the volume buttons to highlight "Yes - Install..." and hit the Power button to select it.
14. When it finishes, the last line should say "Install from sdcard complete."
15. Use the volume buttons to highlight "*****Go Back*****" and hit the Power button to select it.
16. Hit the Power button to select "reboot system now"
17. Your device will reboot
18. http://zakirgsm.blogspot.com/